BOUND FOR PROFIT · JUNE 2026
LLB020: Engrave the Journal Collection
Personalize the refillable journal and matching accessories as one coordinated, sellable collection.
MISSION OBJECTIVE
Create One Coordinated Journal Collection
Use one visual system across the refillable journal, magnetic bookmark, pen sleeve, and sticky note holder. The goal is not four unrelated engravings. The goal is a collection that looks intentional enough to sell as a premium gift set.
PRE-FLIGHT CHECK
Prepare the Products
Inspect
- Check every item for seams, stitching, magnets, and hardware
- Confirm the usable engraving area
- Identify a hidden area for a small test when possible
Secure
- Keep the engraving surface flat
- Use a jig for repeatable placement
- Prevent elastic, pages, and loose parts from entering the laser path
Coordinate
- Use consistent fonts and line weights
- Keep names and logos readable at each product size
- Place the primary design where it will be visible in normal use
BASELINE PROTOCOL
Engrave the Collection
Build the design system
Create a primary layout for the journal, then make simplified companion versions for the smaller accessories.
Create placement guides
Measure each usable area and create a jig, outline, camera reference, or framing box so the artwork lands consistently.
Start with one accessory
Run a small accessory first to confirm color change and detail before engraving the journal cover.
Engrave the journal
Keep the cover flat and clear of stitched edges. Confirm orientation before starting, especially if the removable insert has been taken out.
Engrave the accessories
Complete the bookmark, pen sleeve, and sticky note holder using the coordinated artwork. Refocus when the product thickness changes.
Clean and compare
Use a clean, dry or lightly damp microfiber cloth only after confirming the finish tolerates it. Compare color, scale, and placement across the full set.
Photograph as a collection
Stage the products together so customers see a finished gift set rather than a group of blanks.
TESTED STARTING SETTINGS
Journal Collection
These are starting points recorded in the K&G testing matrix. Product construction and color may affect the result, so test each item separately.
PRODUCT SETTINGS
Refillable Journal
| Machine | Power | Speed | Resolution | Passes / Notes |
|---|---|---|---|---|
| xTool F1 Ultra 20W Diode | 75% | 1020 mm/s | 120 LPC | 1 pass recorded |
| xTool F2 Ultra 40W Diode | 55% | 1600 mm/s | 100 LPC | 1 pass recorded |
| xTool P2 / P2S 55W CO₂ | 18% | 330 mm/s | 120 LPC | 1 pass recorded |
| xTool P3 80W CO₂ | 24% | 700 mm/s | 120 LPC | 1 pass recorded |
| AEON NOVA 14 100W CO₂ | 37% | 400 mm/s | 254 LPI | 1 pass recorded |
PRODUCT SETTINGS
Sticky Note Holder
| Machine | Power | Speed | Resolution | Passes / Notes |
|---|---|---|---|---|
| xTool F1 Ultra 20W Diode | 75% | 1020 mm/s | 120 LPC | 1 pass recorded |
| xTool F1 Ultra 20W Fiber | 70% | 1140 mm/s | 120 LPC | 1 pass recorded |
| xTool F2 Ultra 40W Diode | 55% | 1600 mm/s | 100 LPC | 1 pass recorded |
| xTool P2 / P2S 55W CO₂ | 15% | 400 mm/s | 140 LPC | 1 pass recorded |
| xTool P3 80W CO₂ | 14% | 650 mm/s | 120 LPC | 1 pass recorded |
PRODUCT SETTINGS
Pen Sleeve
| Machine | Power | Speed | Resolution | Passes / Notes |
|---|---|---|---|---|
| xTool F1 Ultra 20W Diode | 85% | 440 mm/s | 120 LPC | 1 pass recorded |
| xTool F2 Ultra 40W Diode | 70% | 1000 mm/s | 100 LPC | 1 pass recorded |
| xTool F2 Ultra 60W Fiber | 45% | 1000 mm/s | 100 LPC | 1 pass recorded |
| xTool P2 / P2S 55W CO₂ | 25% | 500 mm/s | 100 LPC | 1 pass recorded |
| xTool P3 80W CO₂ | 13% | 550 mm/s | 120 LPC | 1 pass recorded |
PRODUCT SETTINGS
Magnetic Bookmark
| Machine | Power | Speed | Resolution | Passes / Notes |
|---|---|---|---|---|
| xTool F1 Ultra 20W Diode | 85% | 440 mm/s | 120 LPC | 1 pass recorded |
| xTool F2 Ultra 40W Diode | 70% | 1000 mm/s | 100 LPC | 1 pass recorded |
| xTool F2 Ultra 60W Fiber | 45% | 1000 mm/s | 100 LPC | 1 pass recorded |
| xTool P2 / P2S 55W CO₂ | 25% | 500 mm/s | 100 LPC | 1 pass recorded |
| xTool P3 80W CO₂ | 13% | 550 mm/s | 120 LPC | 1 pass recorded |
Power is shown as a percentage. Speed is shown in millimeters per second. LPC means lines per centimeter. LPI means lines per inch. Blank cells in the original testing matrix are not presented as recommendations.
QUALITY CHECK
Collection Standards
TROUBLESHOOTING
Common Failures
Double image or ghosting
The item may have shifted. Improve the jig or hold-down and rerun the test on a fresh area.
Weak color change
The pass may not be removing enough of the surface layer. Adjust power or speed conservatively and retest.
Melted or rough edges
Heat input may be too high. Reduce power, increase speed, or improve focus before testing again.
The set looks mismatched
Reduce the number of fonts and design elements. Repeat one visual element across every product.
SELL IT
Package the Collection
Personalized Journal
$29.99 to $39.99A name, monogram, logo, or meaningful phrase on the refillable journal.
Reader Gift Set
$44.99 to $54.99Journal, magnetic bookmark, and engraved pen.
Desk Collection
$59.99 to $74.99+Journal, bookmark, pen, pen sleeve, and sticky note holder.
FIELD NOTES